PEUGEOT 308 SW 2009, Руководство пользователя

Страница: 172 / 329

10
i i
159
CHECKS
RUNNING OUT OF FUEL
(DIESEL)
If your vehicle is fi tted with an HDI en-
gine, the fuel system must be primed if
you run out of fuel.
This system consists of a priming pump,
a transparent pipe and a bleed screw
under the bonnet (refer to the corre-
sponding graphic).
1.6 litre Turbo HDI 16V engine

Fill the fuel tank with at least fi ve
litres of diesel.

Open the bonnet.

Unclip the style cover for access to
the repriming pump.

Squeeze and release the priming
pump until fuel appears in the
transparent pipe with the green
connector.

Operate the starter until the engine
starts.

Put the style cover back in position
and clip it in place.

Close the bonnet.
2 litre Turbo HDI 16V engine

Fill the fuel tank with at least fi ve
litres of diesel.

Open the bonnet.

Unclip the style cover for access to
the priming pump.

Slacken the bleed screw.

Squeeze and release the priming
pump until fuel appears in the
transparent pipe with the green
connector.

Retighten the bleed screw.

Operate the starter until the engine
starts.

Put the style cover back in position
and clip it in place.

Close the bonnet.
If the engine does not start at the
fi rst attempt, do not try again.
Operate the priming pump again,
then the starter.
If the engine does not start at the
fi rst attempt, do not try again.
Operate the priming pump again,
then the starter.