Seite 47 von 72
User Manual
Petwalk Solutions GmbH
Confirm with
OK
. The display will appear as follows:
When the EXIT CONTROL and ACCESS CONTROL icons both flash green, RFID access control is active in
both directions (standard RFID setting).
Press the
ACCESS CONTROL
button repeatedly to adjust the setting to fit your needs:
This setting shows that RFID recognition is only active from outside to inside. The petWALK pet door motion
sensor opens the door from inside to outside.
HINT!
This setting is useful should there be an occasion for an animal that is not yours to
follow your pet into your home (eg. a neighbour‘s cat). This mode ensures that the
animal could leave the house again.
This setting is also useful when you train your pet to use RFID or if your pet is too
shy to get close enough to the petWALK door for it to recognise your pet‘s RFID
collar tag on the inside, as the door leaf will open towards the inside and some pets
have to get used to this for a while.
This setting shows that RFID recognition is only active from inside to outside. The petwalk pet door motion
sensor opens the door from outside to inside.
Once you have found the setting that best suits your needs, save by pressing the
OK
button. Press the
MENU
BUTTON
to exit programming mode.
Содержание petWALK
Страница 1: ...User Manual VERSION 4 1...
