Petwalk Solutions petWALK Скачать руководство пользователя страница 10

Страница: 10 / 72

Seite 10 von 72

User Manual

Petwalk Solutions GmbH

II.

PROPER USE

The petWALK pet door is designed to be used solely by pets (in order to be able to enter and leave a building

independently).

In order to ensure the safety of persons (especially small children) and their pets, the petWALK pet door is

equipped with multiple safety mechanisms.

The petWALK pet door may only be used by people that have read this user manual and the accompanying

assembly and installation manual.

The product may only and solely be used for the purposes of letting pets (e.g. dogs and cats) in and out of your

building. The product must not be used by people, especially small children.

Danger to persons and pets as well as damage to the petWALK pet door can arise if it is not used as intended.

Improper use of the product will result in the loss of guarantee, warranty and product liability claims.

III.

CONTENT & PURPOSE OF THIS DOCUMENT

This user manual contains information relevant to the operation, maintenance, cleaning and reparation as well

as the correct disposal of the petWALK pet door.

The purpose of this documentation is to ensure that the petWALK pet door is safe to use for all persons involved.

Following the instructions in this document will serve to avoid danger and to prevent damage to the petWALK

pet door.

IV.

SAFETY

This user manual is based on the valid EU Regulations and includes safety instructions. Every person who

operates the petWALK pet door is required to have read and understood the user manual. Following the

instructions in this user manual and in the accompanying assembly and instruction manual is a prerequisite for

using the petWALK pet door safely.

General safety instructions

IMPORTANT!

Before you start using your petWALK pet door, it is essential that you read this user

manual as well as the accompanying assembly and installation manual and follow

the instructions!

CAUTION!

Retrofitting the product with various components from third-party manufacturers

as well as making changes to the petWALK pet door without prior agreement with

the manufacturer (Petwalk Solutions GmbH) is prohibited!
It is forbidden for persons that have not read the user manual to use the petWALK

pet door. Keep children (especially small children) away from the petWALK pet

door!

Содержание petWALK









































































Результаты поиска

Содержание petWALK

Отзывы:

Бренды по названию

Популярные бренды

Petwalk Solutions petWALK, Руководство пользователя

Результаты поиска

Содержание petWALK

Отзывы:

Бренды по названию

Популярные бренды