Petwalk Solutions GmbH & Co KG
User Guide
Page 10 of 88
Petwalk Solutions GmbH & Co KG
User Guide
Page 10 of 88
8.4
DESCRIPTION OF THE PET DOOR ELEMENTS
Basically, the construction consists of two frames – the outer frame
!
(also called "outer flange")
and the inner frame
"
(„inner flange“), which are pressed towards each other and fixed directly
onto the component by threaded rods
#
.
On the outer flange the engines, the automatic door leaf, locking mechanisms, hardware and
electronics are mounted. The inner flange includes a display, electronics and the IR sensor for
the remote control.
Decorative covers
$
(for example acrylic glass or HPL material) can be mounted on the outer
parts of both flanges.
If the clamped component is very narrow (<5cm), a so-called spacer
%
is needed to establish the
required distance for clamping. In case a bigger distance needs to be bridged, for instance when
installing into a wall a suitable tunnel
&
will connect the outer to the inner frame.
If very high insulation values are desired, an additional insulation frame
'
can be attached or
the outer frame can be covered by wall insulation material when installing your pet door into
masonry.
!
"
#
#
#
#
$
$
%
&
'
