Page 61 of 88
User Guide
Petwalk Solutions GmbH & Co KG
If this period is adjusted as desired, confirm the settings with
OK
. Now the time period, in
which your pets can come back into the house, is stored and you are in setup mode again. You
can exit by pressing the
OK
button or by pressing the
Setup
button or by pressing the
Operating Mode
button.
This setup dialogue can be interrupted at any time by pressing the
Setup
button or the
Operating Mode
button – the so far changed values will not be saved.
10.4.4
PROGRAMMING OF DOOR CONTROL BY RFID CHIPS
As described above, the petWALK pet door can also be controlled by RFID transponders, which
act as the pet’s house keys not matter they are implanted or carried on a collar. If the RFID chip
has been programmed, the door just opens, if your pet is in front of the door.
Up to 254 RFID chips (pets) can be registered at a petWALK pet door. In another programming
step, you can also determine if the time program shall apply to the appropriate pet, or this
particular pet is always or never allowed to open the door.
NOTE!
Even if your pet is micro chipped, you should use the supplied
chip first to get your pet used to this process. If your pet gets
used to it and is no longer afraid to get near to the pet door, you
may switch to use the implanted chip.
NOTE!
We have no control on the quality of the chips implanted by a
veterinarian and also on the area of implantation. Therefore, it
is possible that the pet door just starts reacting, when your pet
is already very close to it. Experience shows that pets quickly
understand how they can pass.
