16
17
AC 120V/10A
Current Protect Socket
Water Pipe Inlet
Water Pipe Outlet
3/8” Brine Tube
Brine Tank
5/8” Overflow line
Optional
Pipes Fixed
Structure
Floor Drain
Laundry Drain
5/8” Drain Line
Pressure Tank
Drain Elbow
Assembly
Brine Elbow
Assembly
Optional
Overflow
Assembly
Outlet
NOTICE - THERE ARE INLET AND
OUTLET LABELS ON THE VALVE.
PLEASE MAKE SURE TO PLUMB
AS SHOWN HERE
Inlet
Cold (Raw water)
Cold (Filtered water)
Cold (Raw water)
Water Heater
Hot (Soft Water)
Upflow Water Softener
Filter
In
In Out
Out
Cold (Soft Water)
To Outside Faucet
In
Out
Water Softener Installation
Connect Softener to the HousePlumbing
Any solder joints near the valve must be done before connecting any piping to the valve. Always leave at least 6” (152 mm)
between the valve and joints when soldering pipes that are connected to the valve. Failure to do this could cause damage to the valve.
CAUTION!
Never insert drain line
directly into a drain, sewer line, or trap.
Always allow an air gap between the drain
line and the wastewater to prevent the
possibility of sewage being back-siphoned
into the conditioner.
NOTE
Waste connections or drain
outlet shall be designed and
constructed to provide for
connection to the sanitary
waste system through an
air-gap of 2 pipe diameters
or 1 inch (22 mm) whichever
is larger.
WATER SOFTENER INSTALLATION