Petsafe PRF-3004W-20 Скачать руководство пользователя страница 6

www.petsafe.net

How the System Works

A radio signal travels from the Fence Transmitter through a buried wire, marking the boundaries you wish to set for your 
dog. Your dog wears a Receiver Collar that detects the signal at the boundary. As your dog approaches the boundary, the 
receiver issues a warning tone. If he proceeds further, he receives a safe but startling Static Correction. While harmless, the 
correction will persuade him to stay in the containment area you’ve established. Boundary fl ags are a temporary visual aid 
for your pet; remove them after training. This PetSafe

®

 In-Ground Fence

 has been proven safe, comfortable, and effective 

for pets over 3.6 kg (8 lbs).

Key Definitions

Fence Transmitter:

 Transmits the radio signal through the Boundary Wire.

Pet Area:

 Area within the Warning Zone where your pet can roam freely.

Warning Zone:

 Outer edge of the Pet Area where your pet’s Receiver Collar begins to beep, warning him not to go into the 

Static Correction Zone.

Static Correction Zone:

 Zone beyond the Warning Zone where your pet’s Receiver Collar will emit a Static Correction, 

signaling him to return to the Pet Area.

Boundary Width: 

Combination of the Warning Zone and the Static Correction Zone.

Receiver Collar: 

Receives the radio signal from the Boundary Wire.

Contact Points:

 Delivers the safe Static Correction when your pet moves into the Static Correction Zone.

Power Jack:

 Where the Power Adapter plugs into the Fence Transmitter. The Fence Transmitter is powered by a 

standard outlet.

Boundary Control Switch:

 Switch located on the Fence Transmitter to adjust according to the length of Boundary Wire used.

Boundary Wire Terminals:

 Where the Boundary Wires connect to the Fence Transmitter in order to complete a 

continuous loop.

Loop Indicator Light:

 Indicates that the Boundary Wire makes a complete loop, enabling the signal to be transmitted.

Boundary Width  Control:

 Adjusts the width of the Warning and Static Correction Zones. 

Note: Adjusting the knob does not 

change the level of Static Correction on the Receiver Collar.

Pet Area

Static Correction

 Zone

Static Correction

 Zone

Fence

Transmitter

Warning

 Zone

Warning

 Zone

Boundary

 Width

}

Boundary Width 
Control

Power Light

Loop Indicator Light

Boundary Wire 
Terminals

Boundary 
Control 
Switch

Power
Jack

Fence Transmitter

BATTER

Y 6V

RFA-67

Battery

Contact Points

Washers

Receiver Collar

Содержание PRF-3004W-20


























Отзывы: