Petsafe PIG00-11115, Руководство по эксплуатации

Страница: 11 / 36

www.petsafe.net 11
YardMax
®
Mode (A) Layouts
The YardMax Fence system can only be used with a single
loop layout.
Sample 1(4E): Full Perimeter Loop
With a full perimeter loop, YardMax mode allows your pet to
maximize the pet area and roam the entire property freely and safely.
Sample 2 (4F): Full Perimeter Loop Using Existing Fence
This layout allows you to include your existing fence as part of your
layout and keep your pet from jumping out or digging under your
existing fence. This layout also greatly reduces the installation time
since most of the wire will not need to be buried.
Using either sample 1 or 2, run the wire from the fence transmitter
to point
A
, then to point
B
and so on (
B
to
C
to
D
to
E
) all the way
around the entire property until back to point
A
again. The wires from
point
A
will then need to be twisted and connected back to the fence
transmitter inside your home.
Traditional Mode Layouts (Setting B)
Traditional mode can be used with either a single loop or a double
loop layout. Sample 1 (
4E
) and Sample 2 (
4F
) layouts may be also
be used in Traditional mode.
Sample 3 (4G): Perimeter Loop with Exclusion Areas
(Single Loop)
This layout allows you to keep your pet out of gardens, pools or
landscaping within your yard.
Sample 3
Wire
Splices
Place
Transmitter
Inside
Pets Can
Safely Cross
Twisted Wires
Pets Can
Safely Cross
Twisted Wires
10 Twists/ft.
4G
Sample 1
Sample 2
D
E
A
C
B
D
E
A
C
B
4E
4F