6
petsafe.com
Tone Symbol:
Delivers a tone with non-adjustable volume to the
collar.
Vibration Symbol:
Sends 1 non-adjustable level of vibration
stimulation to the collar. Level 0 is vibration.
Static Symbol:
Delivers up to 15 levels of static stimulation to the
collar that can be adjusted with the level adjuster button. Levels 1-15
are static stimulation.
Lock Symbol:
Indicates static stimulation levels 8-15 are locked.
Dog 1 / Dog 2:
Indicates which training collar is active.
Battery Indicator:
Indicates the amount of battery remaining in the remote.
Fit the Training Collar
Important: The proper fit and placement of your training collar is important for effective operation. The contact
points must have direct contact with your dog’s skin on the underside of his neck.
1.
Start with the collar turned off and your dog
standing comfortably, not sitting (
A
).
2.
Place the training collar on your pet so that
the PetSafe
®
logo is right side up and the
training collar is directly under your dog’s
chin. Center the contact points underneath
your d
og’s neck, touching the skin (
B
).
Note:
It’s sometimes necessary to trim the hair around the contact points to make sure that
contact is consistent. We’ve also included longer contact points.
Do not shave the pet’s neck as this may increase the risk of s
kin irritation. The training collar should not be worn
for more than hours out of every 24-hour period. Leaving the training collar on too long could lead to skin
irritation. Remove the collar when you’re not training your dog.
12
3.
Check the tightness of the training collar by inserting one
C
finger between the end
of a contact point and your dog’s neck (
C
). The fit should be snug but not constricting.
4.
Allow your dog to wear the training collar for several minutes, then recheck the fit.
Check the fit again as your dog becomes more comfortable with the training collar.
