DE
NL
IT
FR
ES
EN
www.petsafe.net 7
6 www.petsafe.net
Key Definitions
•
5-Button navigation
– Group of five buttons with up arrow key, down arrow key, left arrow/back key, right arrow key, and enter/select
key used to navigate the Cat Flap’s menu system for easy programming. Located in Control Panel on Interior Frame.
•
antenna
– The Antenna is located inside Main Flap and receives radio signals from microchips. The microchip must be located within a certain
distance of Antenna in order for the unique code to be read.
•
Battery Compartment
– The Battery Compartment is located on Interior Frame and holds the optional Passport
™
Rechargeable Battery
(sold separately).
•
Battery Cover
– Covers and protects optional rechargeable lithium-ion battery and Battery Compartment.
•
Blind Zones
– Areas where Motion Sensors cannot detect your cat and the Cat Flap will not read your cat’s microchip or Passport
™
Key.
•
Clock Battery
– The 3-V lithium coin cell battery (size CR2032) which keeps the clock’s time during any power loss.
•
Clock Battery Cover
– Covers and protects 3-V lithium coin cell Clock Battery and electronics circuit board.
•
Control panel
– Area at top of Interior Frame where LCD Screen, 5-Button Navigation, Wireless Card Port, USB Port, and Reset Button
are located.
•
Control panel Cover
– Door that covers and protects Control Panel.
•
Concealed power Connection
– For connecting the Cat Flap to the Power Adaptor.
•
Cut-out Size
– Size of opening cut in homeowner’s door for proper fit and Cat Flap installation.
•
exterior frame
– Size of Cat Flap frame on the outside of the home.
•
flap opening Size
– Size of usable flap space for cat to enter and exit through the Cat Flap.
•
In-only access
– Pet access setting which only allows programmed cats to enter but not exit. Flap operational mode must be set to Smart
Mode for In-Only Access to work.
•
In/out access
– Pet access setting which only allows programmed cats to enter and exit. Flap operational mode must be set to Smart Mode
for In/Out Access to work.
•
In-tone
– Optional, audible alert that sounds when programmed cat enters. Flap operational mode must be set to Smart Mode for In-Tone to
work. Default factory setting is off with 10 sound options available.
•
Interior frame
– Cat Flap frame on the inside of home. Frame with Main Flap and Control Panel.
•
LCD Screen
– Liquid crystal display screen to visually display text and images to easily program the Cat Flap. Located in the Control Panel on
the Interior Frame.
•
LeD/Light Indicator
– Light on Interior Frame which blinks green once every 6 seconds when power source (Power Adaptor or rechargeable
battery) is in good operating status. Blinks a red light twice every 6 seconds when powered by the rechargeable battery and the battery is low
(Low Battery Mode). If Cat Flap has an error alert (ATTENTION screen), the LED will blink red once every 6 seconds.
•
Lock Keypad
– Allows 5-Button Navigation buttons to be disabled by setting a 4 digit PIN number.
•
Locked mode
– Cat Flap operational mode where flaps are locked and do not allow entry or exit for any cat.
•
Locking U-flap
– The “U” shaped flaps on the interior and Exterior Frames which lock in multiple points along the bottom and sides for added
lock strength and improved weather resistance.
•
Low Battery mode
– When powered by the optional Passport
™
Rechargeable Battery, allows the Cat Flap to be set to a specified open or
locked position when the battery charge runs low and shuts down. Also allows an optional audible alert to notify you when the battery is low.
The default factory setting is off for the beep and locked for the flap if the battery shuts down. An alert (ATTENTION screen) will appear on the
LCD Screen and LED will blink red twice every 6 seconds when the Cat Flap enters Low Battery Mode.
•
main flap
– The center, plastic flap with UV sun protection which covers the flap opening.
•
master access
– Pet access setting which easily allows same access mode and settings to be set for all programmed cats without the need to
individually program setting by cat. This is the default factory pet access setting for each cat.
•
motion Sensing Zones
– Areas where Motion Sensors detect motion and trigger the reader, which reads your cat’s microchip, to turn on.
•
motion Sensor
– Detects movement from cat (or other moving objects) and triggers the Cat Flap to power up so it can read the microchip. A
Motion Sensor is located on both the Interior Frame and Exterior Frame.
•
motion Sensor Wire
– Connects the exterior Motion Sensor to the electronics board.
•
open mode
– Cat Flap operational mode where flaps are unlocked and allows entry and exit for all. The Cat Flap will function like a
traditional cat flap in this mode.
•
out-only access
– Pet access setting which only allows programmed cats to exit but not enter. Flap operational mode must be set to Smart
Mode for Out-Only Access to work.
•
out-tone
– Optional, audible alert that sounds when programmed cat exits. Flap operational mode must be set to Smart Mode for Out-Tone
to work. Default factory setting is off with 10 sound options available.
•
outer frame Size
– Overall Cat Flap dimensions.
