www.petsafe.net 5
Connect the Bottom Frame
Important: Assemble on a level surface.
Gather (Quantity):
• (4) Corner Connectors
• (4) Tube A
• (4) Tube B
1. Begin at any corner.
Assemble corner connector
to tube B. Press button
on connector and insert
into tube ensuring that
the hole in the tube lines
up with the button on the
connector. It should lock
into place. Slip swedged
ends of the tubing into the
next piece of tubing.
2. Assemble tube A to tube
B. Continue assembling
connectors and tubes. (See
Diagram)
Option 1 -
Dog Kennel
10’(W) x 10’(L) x 6’(H)
Option 2 -
Dog Run
5’(W) x 15’(L) x 6’(H)
A
B
A
B
A
B
Swedged
End
A
B
A
B
B
B
B
A
A
A
Complete Frame and Add Uprights
Gather (Quantity):
• (4) Tube A
• (4) Tube B
• (4) Tube E
• (4) Corner Connectors
1. Connect tube E to each
of the bottom corner
connectors. (See Diagram)
2. Insert corner connector
to each tube E.
3. Assemble tube A + B around
top to make the frame.
Gather (Quantity):
• (2) Tube G
• (1) Tube F
• (1) Tube H
• (12) End Rail Clamps
• (6) Carriage Bolts and nuts
Note: Tube placement shown in
diagrams
4. With nut on the outside;
clamp Tube G to the top and
bottom frame rails.
5. For Option 1
– 10x10x6: use
Tubes F and H together as
shown in diagram.
Option 1 -
Dog Kennel
10’(W) x 10’(L) x 6’(H)
Option 2 -
Dog Run
5’(W) x 15’(L) x 6’(H)
E
G
F
E
E
G
E
H
A
A
A
A
A
B
B
B
B
B
A
A
A
B
B
B
G
E
F
A
A
A
B
B
A
B
B
A
B
B
A
A
B
B
A
E
G
G
G
E
E
For Option 2
– 5x15x6: use Tube F as shown in diagram. Tube H will not be used.
Step
1
Step
2
