Petite & Mars Grand II, Руководство пользователя

Страница: 45 / 47

45
After laying the child in the stroller, fasten the belts as follow:
as the first slide the buckle of the right shoulder belt into
the central buckle and secure it with the right waist belt, repeat the same action
even for the left part of the retraining system. Adjust the length of the belts,
making sure they adhere to your child’s shoulders and body.
To unfasten the restrain system press the central button.
WARNING: Always use the restraint systems. For the safety of your child use all
five fixing points of the safety harness belts.
WARNING: To ensure the safety of your child, use the safety belts at all times.
For further safety, the stroller is equipped with ‘’D’’-shaped rings to allow
hooking an additional safety belt, compliant with BS 6684 standard. The rings
are located inside the stroller’s seat on the right and left side
Note: When use the winter foot-muff, pass the retaining system by the holes
in the foot-muff as the first. For their settings follow the instructions given above
in the article “USE OF THE SAFETY BELTS”.
REMOVING THE SAFETY BELTS
13. The safety belts can be removed (to be washed or used in pram configuration).
If you want to remove the safety belt, it is necessary to stretch the clip-foot strip
and pull it through the hole in the seat outwards, then pull the buckle shoulder
straps and pull them through the holes in the backrest outwards.
The waist belts are firmly attached to the stroller, so for the pram configuration
cover the waist belt by the extra padding.
After removing the seat belt, make sure that the new installations would
be passed through anchor points correctly. For new installation, please follow
the steps below carefully:
Pull the clip through the hole for between-foot belt. Make sure that the buckle pass
through the hole and the belt with the central buckle was turned towards you.
After that, pull the buckle of the shoulder belt through the hole in the backrest
and secure it, the same repeat for the second shoulder belt.
WARNING:
At the end of the assembly, the belts must be adjusted once again
according to the size of your child.
PARKING BRAKE
14. The stroller is equipped with pedal parking brake located on the rear axle.
To engage the parking brake, press the pedal downward with one foot.
To disengage the parking brake, push the pedal upward, see Fig 20.
WARNING: Always use the brake when not moving. Never leave the stroller
on a sloping surface with your child inside it, even if the parking brake
is engaged.
WARNING: After engaging the parking brake, make sure the brakes
are properly enabled on both rear wheels.
EN