Perreaux Audiant 80i, Руководство пользователя

Страница: 7 / 16

5 Phono Earth Terminal
The phono earth terminal connects to the earth lead from the tonearm cable of a record player, if
required.
6 Phono Input
These sockets are for connecting to an analogue record player. The phono input is only compatible
with moving-magnet (MM) cartridges.
If you wish to use an external phono amplifier, the internal phono stage can be bypassed and used as
a line level input. Ask your Perreaux dealer for assistance with bypassing the internal phono stage.
7 Aux, Disc Inputs
These inputs are suitable for any ‘line level’ source equipment such as CD players, DAB or FM/AM tuners
etc.
Note: These inputs are for analogue audio signals only. They should not be connected to the digital
output of a CD player or any other digital device.
8 HT Loop Switch
This switch is used to select the operation of the HT Loop Input.
‘HT’ is selected by default from the factory and bypasses the volume control allowing the Audiant 80i
to be integrated into a home theatre system.
Setting to ‘Line’ allows the HT Loop Input to be used as a line level input for analogue sources such as
an iPod or tape deck.
Caution: When connecting a line level signal, make sure the HT Loop Switch is set to ‘Line’, otherwise
serious damage may occur to the amplifier and/or your speakers.
9 HT Loop Input
The Home Theatre Loop is used to integrate the Audiant 80i into a home theatre system that has
preamp outputs on the surround processor or receiver. Please ensure the volume level of the
connected processor is suitably attenuated before selecting this input.
It can also be used as a line level input depending on the setting of the HT Loop Switch.
10 Line Out
These sockets provide a line level audio signal, suitable for recording from the selected source input.
The input should not be changed whilst recording.
11 Pre Out
These sockets provide a preamp level audio signal for connection to an external power amplifier or
active subwoofer.
12 Coax Input
The Coax Input is for connecting coaxial digital sources, such as CD players, music streamers etc.
13 Opt1, Opt2 Inputs
These inputs are for connecting optical digital sources, such as TVs, Sky and Freeview set-top boxes etc.
14 USB Input
The USB input allows connection to a computer and supports high resolution asynchronous USB
Audio up to 24-bit/96kHz.
When connecting to your computer via USB, the Audiant remote control will allow basic control of your
music application, such as iTunes, Windows Media Player etc. (see Remote Control, page 8).
15 RS232 Port
The RS232 port allows external serial control of the Audiant 80i for custom install use. A full command
set is available on the Perreaux website. This port can also be used by Perreaux service personnel for
software updates.
6