Perreaux Audiant 80i, Руководство пользователя

Страница: 8 / 16

Operation - Front Panel
1 Standby Button
The Standby Button switches the unit between Standby mode (indicated by dim standby LED) and On
(indicated by bright standby LED). Standby is a low-power mode where the power consumption is less
than 1 Watt. The unit should be left in Standby mode when not in use.
2 Source Buttons
The Source Buttons allow you to select the source component that you wish to listen to. The signal
selected is also fed to the Line Out sockets so that it may be recorded. The input should not be
changed whilst recording.
3 Volume Control
The Volume Control increases/decreases the level of the sound from the outputs of the amplifier. This
control affects the level of the loudspeaker output and the preamp output. It does not affect the Line
Out connections.
Note: When HT Input (Home Theatre Loop) is selected, and the HT Loop Switch is set to ‘HT’, the
volume control will have no effect on the volume level of the amplifier.
4 Infrared Sensor
The Infrared (IR) Sensor receives commands from the supplied Audiant remote control. Clear
unobstructed line of sight between the remote control and the sensor is required.
4 1 2 2 3
7