Permobil Inception, Руководство по эксплуатации

Страница: 8 / 16

Inception Operation Manual
6
ROHO Air Insert Setup
Important Safety Information
Note: If a ROHO Air Insert is included with the product, read these warnings and follow the instructions on the next page.
WARNINGS:
- An Incontinent Liner, when ordered with a ROHO Air
Insert, has a small valve-access opening that will reduce
the liner's fluid-resistance.
- The air insert MUST be correctly installed in the cushion.
- DO NOT use an under-inflated or over-inflated air
insert because 1) the product benefits will be reduced
or eliminated, resulting in an increased risk to skin and
other soft tissue, and 2) the individual may become
unstable and vulnerable to falling. Carefully follow the
instructions for inflation and hand check.
- After setting up the air insert for the first time, check
inflation frequently, at least once a day. Follow the hand
check instructions in this manual.
- If the air insert does not appear to be holding air, or if
you are not able to inflate or deflate the air insert, see
“Troubleshooting”. Immediately contact the equipment
provider or Customer Support if the problem persists.
- The air insert surfaces will acclimate to the surrounding
temperature. Take appropriate precautions, especially
when the air cells will contact unprotected skin.
CAUTIONS:
- Periodically, check the air insert for damage and
wear, and replace if necessary.
- DO NOT use a pump, cover or repair kit other than
those compatible with the product.
- DO NOT allow the air insert to come into contact
with oil-based lotions or lanolin. They may degrade
the material.
- Prolonged exposure to ozone may degrade
materials used in the air insert, affect performance,
and void the warranty
- Changes in altitude may require adjustment to the
air insert.
- DO NOT expose the air insert to temperatures
above 70°C (158°F), which may accelerate aging
and cause product damage.
- If the air insert has been in temperatures lower
than 32°F (0°C) and exhibits unusual stiffness,
allow to warm to room temperature.
Rigid Insert (Removable Version)
WARNINGS:
- Follow these instructions for the correct
placement of the Rigid Insert. Place the
Rigid Insert inside the cover and beneath
the cushion. Placing the Rigid Insert outside
the cover will interfere with the cover's
non-skid bottom.
- Make sure the Rigid Insert is correctly
oriented so it matches the shape of the
cushion bottom. Request assistance if
needed.
Removal: Have the user transfer off the cushion. Unzip the
cover. Remove the Rigid Insert.
Replacement:
1. Have the user transfer off the cushion. Unzip the cover. Place
the Rigid Insert inside the cover and beneath the cushion.
2. If using the Incontinence Liner, place the Rigid Insert beneath
(not inside) the Incontinence Liner.
3. Confirm all cushion components are correctly placed. Close the
zipper.
4. If using a ROHO Air Insert, follow the air insert setup
instructions.
ROHO Air Insert Placement and Removal
Placement:
1
Line up the hook and loop fastener strips and refer to directional labels to correctly place the air insert on the
cushion. Press to attach securely.
2 Insert the inflation tubing through the hole, located in the back of the cushion.
3 Check inflation. If adjustment is needed, follow the air insert setup instructions.
4 Place the covering(s) on the cushion. See "Coverings - Installation and Removal" in this manual.
Removal:
1
Remove the covering(s) from the cushion. See "Coverings - Installation and Removal" in this manual.
2 Gently pull the inflation tubing through the hole, located in the back of the cushion.
3 Remove the air insert from the cushion.