Permobil Inception, Руководство по эксплуатации

Страница: 10 / 16

Cleaning and Disinfecting
WARNINGS:
- Follow all manufacturer bleach container and germicidal disinfectant safety guidelines.
- Cleaning and disinfecting are separate processes. Cleaning must precede disinfection. If the product becomes
soiled: clean, disinfect, and check the product for proper functioning.
- Clean the product regularly and when it becomes soiled.
Covers
CAUTIONS:
- Before cleaning and disinfecting, remove the covering(s) from the cushion. Remove any hook fastener pieces
from the bottom of the cover.
- Frequent heat drying and bleaching will cause fabric to break down. Air drying and cleaning without bleach are
recommended, whenever possible, to help extend the life of the cover.
Surface Cleaning for COMFORT-TEK Fabric Only: Spray with common household or
commercial antibacterial cleansers or disinfectants. Wipe with a damp, water-only cloth after
disinfecting. Let dry completely before use.
Cleaning: When possible, hand wash in warm water with mild soap, rinse thoroughly with
clean water, and line dry. Let dry completely before use.
Or
Machine wash using common laundry detergent and tumble dry low.
40C
Or
Disinfecting: Hand wash the cover with water and bleach using 1 part household liquid
bleach per 8 parts warm 40°C/104°F water. Rinse thoroughly with clean water, and line dry.
Let dry completely before use.
Or
Machine wash hot using common laundry detergent and tumble dry low.
60C
Or
Foam Components
WARNING: Disinfectants are NOT effective on porous surfaces such as foam. DO NOT use if the foam
becomes soiled or contaminated. Replace all soiled or contaminated foam or foam components.
CAUTIONS: DO NOT submerge any foam components in water. DO NOT use soap. DO NOT expose to
direct sunlight.
Remove the covering(s). Wipe lightly with a damp cloth. DO NOT use soap. Air dry completely before
use. Replace the covering(s) only after the foam is completely dry.
Rigid Insert and Removable Solid Seat Pan
Rigid Insert Caution: Before cleaning or disinfecting, remove the Rigid Insert from the cover. Refer to the
instructions in this manual.
Cleaning: Hand wash in warm (40°C/104°F) water with soap and a sponge. Rinse with clean water and
wipe dry with a clean cloth. Dry completely before use.
Disinfecting: Wipe gently with a cloth dampened with a household disinfectant. Rinse with clean,
warm water. Wipe dry with a clean cloth. Dry completely before use.
Inception Operation Manual
8