Permobil Inception, Руководство по эксплуатации

Страница: 12 / 16

Troubleshooting
For additional assistance, contact the equipment provider or Customer Support.
The air insert is not
holding air.
Inflate the air insert . Inspect the inflation valve and hose for damage. Confirm that the
inflation valve is completely closed. Look for holes in the air insert. If very small holes are
visible, follow the instructions in the repair kit provided with the air insert. For inflation
valve or hose damage, or for large holes or leaks in the air insert, contact Customer
Support.
Not able to inflate or
deflate the air insert.
- Confirm that the inflation valve is open.
- Inspect the inflation valve and hose for damage.
The product is
uncomfortable or
unstable.
- Make sure that all components are correctly installed. See below for cushion and cover
orientation.
- Confirm that the cushion is centered beneath the user.
- Confirm that the cushion is properly sized to the user and the wheelchair.
- If an air insert is used:
- Confirm that the air insert has the correct amount of air (see “ROHO Air Insert Setup”).
- Make sure that the air insert is correctly placed on the cushion.
- The air cells and the top of the cover should face up.
- The air insert should be centered beneath the user.
After checking all of the above, allow the individual at least one hour to adjust to the air
insert.
Not sure about
orientation of
the cushion and
covering(s).
Orientation Guide
- The covering(s) should be oriented with the zipper in the back of the cushion.
- If the foam is contoured on top, the contoured shape of the cushion and the covering(s)
should face up.
- Not every Inception is contoured. Each Inception is uniquely constructed.
- If the cushion is uniform in shape, orient as prescribed for the user and the wheelchair.
- Some Inception cushions include a dark foam layer on the bottom.
The air insert slides
on the cushion.
Make sure the air insert is correctly attached to the cushion and that the hook and loop
fastener strips line up correctly (see "ROHO Air Insert Placement and Removal").
The cushion slides
on the wheelchair.
- Make sure the non-skid bottom of the cover is facing down.
- When possible, use hook and loop fastener strips to further secure the cushion to the
seating surface. Hook fasteners are available upon request.
A component is
damaged.
Contact Customer Support for a replacement.
Inception Operation Manual
10