Permobil C400, Руководство по обслуживанию

Страница: 72 / 132

Permobil C400 Corpus 3G Lowrider Repairs
5.
Figure 111. The backrest profile is secured using two
screws on the left and right
Remount the backrest profile by fitting the bracket in-
to the profile groove on the left and right sides. Slide
the profile downwards until the stop on the bracket is
touching the end of the backrest profile on both the
left side and the right. Secure the backrest profile by
tightening the two screws on the left and right. See
fig. 111. Tighten the screws using a torque wrench.
Tightening torque 9.8 Nm.
6.
Figure 112. The armrests are held in place by four
screws. The joint for the backrest slide function is held in
place by one screw
Mount the armrests using the four screws. See fig.
112. Tighten the screws using a torque wrench.
Tightening torque 9.8 Nm.
7.
Figure 113. 1. The contact on the ICS switchbox cabling
is above the contact block. 2. The BUS contacts are
mounted on the contact block.
Mount the joint for the backrest slide function using
the screw supplied. See fig. 112. Tighten the screw
using a torque wrench.
Tightening torque 9.8 Nm.
8. Mount the BUS contacts on the contact block and
mount the cabling for the ICS switchbox at the contact
on the cabling. See fig. 113.
72