Permobil C400, Руководство по обслуживанию

Страница: 71 / 132

Permobil C400 Corpus 3G Lowrider Repairs
Mounting
1.
Figure 108. Apply thread locker.
Push the threaded rod into the backrest profile and at
the same time screw on the driver (1). See fig. 108.
2. Apply thread locker (Loctite 2701) to the ends of the
threaded rod and fit the two end pieces (2 & 3) onto
the threaded rod. See fig. 108.
3.
Figure 109. The adjustment bar brackets are each held in
place by two screws
Mount the adjustment bar brackets, which are each
held in place by two screws. See fig. 109.
4.
Figure 110. The end cover of the backrest profile is se-
cured using one screw on the left side and one on the
right.
Remount the end cover of the backrest profile by
pushing it straight into the end of the profile. Secure
the cover by tightening the screws on the left and
right. See fig. 110.
71