Perlick Residential Refrigeration, Руководство пользователя

Страница: 9 / 50

www.bringperlickhome.com
9
Slide the cabinet into position, making sure the
rear cabinet leveling legs slide under the anti-tip
devices. Push the cabinet into the opening until
the bottom front edge of the cabinet is flush with
the surrounding cabinetry or the leveling legs
are tight with the anti-tip devices (Refer to ANTI-
TIP ILLUSTRATIONS on pages 8-9 for details).
The rear cabinet leveling legs should be held
between the anti-tip device and the floor.
To finish the leveling of the cabinet, shim the
front of the cabinet so the front face of the
cabinet is flush with the surrounding cabinetry.
Adjust the front leveling legs to support the
cabinet at the shimmed height. Adjust legs by
turning counterclockwise to raise the unit and
clockwise to lower the unit, using an adjustable
wrench or pliers. Countertop should be resting
on top of cabinet.
IMPORTANT NOTE: If countertop is not resting
on entire cabinet top, shimming of the
countertop should be performed to prevent
damage to the countertop.
CAUTION
CARE SHOULD BE TAKEN TO PREVENT
DAMAGE TO THE REFRIGERATED CABINET
AND COUNTERTOP BY NEVER PLACING
HEAVY OBJECTS ON TOP OF THE
COUNTERTOP DIRECTLY ABOVE THE
APPLIANCE.
Check interior door openings inside the cabinet
to ensure the cabinet is level.
Re-install all
shelving and drawers. Take extreme care to
insert sliding shelving and sliding drawers
squarely into slide brackets and proper slide
bracket grooves. When sliding shelving and
drawers are installed properly a click should be
heard from both slide bracket retaining clips and
should slide smoothly in the tracks. When
sliding shelving or drawers are pulled out to full
extension a stop is activated to prevent
additional pull-out.
CAUTION
IMPROPER SHELVING OR DRAWER
INSTALLATION MAY NOT ACTUATE SLIDE
STOP MECHANISM.
TOE PLATE INSTALLATION
When the unit is secured in place, install the
louvered toe plate. Using included fasteners,
secure the louvered toe plate to the cabinet flush
with the floor. Refer to TOE-PLATE
INSTALLATION ILLUSTRATION below.
ILLUSTRATION 5. TOE PLATE INSTALLATION.
CAUTION
THE LOUVERED TOE PLATE MUST BE
REMOVABLE FOR SERVICING. THE FLOOR
CANNOT INTERFERE WITH REMOVAL. THE
LOUVERED SECTIONS OF THE TOE PLATE MUST NOT
BE COVERED OR OBSTRUCTED SO AS TO
PREVENT PROPER AIR CIRCULATION.