Perlick Residential Refrigeration, Руководство пользователя

Страница: 23 / 50

www.bringperlickhome.com
24
IMPORTANT NOTE: THE LED DISPLAY IS
READING ACTUAL AIR TEMPERATURE NOT
PRODUCT TEMPERATURE. UNDER THESE
CONDITIONS, AN 8 F AIR TEMPERATURE
SWING IN THE FREEZER COMPARTMENT
AND A 2 F AIR TEMPERATURE SWING IN
THE REFRIGERATOR COMPARTMENT DOES
NOT CHANGE THE ACTUAL PRODUCT
TEMPERATURE. PRODUCT TEMPERATURE
REMAINS AT A VERY STABLE
TEMPERATURE.
LIGHT SWITCH AND BULB
Your Two-Door Freezer/Refrigerator has two
interior lights that are illuminated when the
corresponding door is opened. The cabinet also
comes standard with manual light switches
located next to each light for displaying your
products through a glass door. If manual light
switch is left on for an extended period of time it
may increase the cabinet temperature,
especially in close proximity to the light at the
top and cause the refrigeration system to run
longer.
TWO DOOR ALL-
REFRIGERATOR
OPERATION
The Perlick Two Door All-Refrigerator
(H2RO)
comes equipped with a state of the art
refrigeration system. The compressor is of a
variable speed variety, which automatically
changes speeds based on system conditions
and load. The cabinet is equipped with an
adjustable digital temperature controller and
LED display. The controller can be adjusted
through a range of 30 F to 42 F. The
refrigerator controller has been factory set to
modulate from 34 F to 40 F. To properly
determine product temperature see “CHECKING
PRODUCT TEMPERATURE” on page 44.
IMPORTANT NOTE: ALWAYS ALLOW
CABINET TO RUN FOR A MINIMUM OF 24
HOURS TO ALLOW TEMPERATURE
STABILIZATION AFTER START-UP BEFORE
STORING PERISHABLE ITEMS.
This cabinet is a frost-free model meaning the
evaporator (cooling coil) automatically defrosts
during off cycles. The controller also has a
manual defrost soft button on the front panel
signified by a melting snowflake, which has been
disabled on this model.
PROPER PRODUCT STORAGE
Store product as desired. Do not block internal
louvers or fan guard openings, as this will
decrease operating performance.
CONTROL SETTINGS
The cabinet is shipped with the controllers
turned ON. To turn the refrigeration system
OFF or ON press the blue soft button on the
front face of the controller (if the controller is
turned off with power applied to the cabinet the
LED display will read OFF, when turned on it will
read a temperature). The controller is located
on the top front face of the cabinet above the left
door and is equipped with a tinted see-through
lens which opens by pulling out on the bottom of
the lens and rotating upwards. Always ensure
lens cover is closed before closing door to avoid
damage to the controller or lens.
The refrigerator electronic control comes preset
for a product temperature of approximately 38 F
with a product temperature adjustability range of
33 F to 45 F. To change temperature controller
settings
see section “TEMPERATURE
CONTROLLER ADJUSTMENTS”
on page 42.
IMPORTANT NOTE: THE LED DISPLAY IS
READING ACTUAL AIR TEMPERATURE NOT
PRODUCT TEMPERATURE. UNDER THESE
CONDITIONS, A 6 F AIR TEMPERATURE
SWING IN THE REFRIGERATOR
COMPARTMENT DOES NOT CHANGE THE
ACTUAL PRODUCT TEMPERATURE.
PRODUCT TEMPERATURE REMAINS AT A
VERY STABLE TEMPERATURE.
LIGHT SWITCH AND BULB
Your Two-Door All-Refrigerator has two interior
lights that are illuminated when each
corresponding door is opened. The cabinet also
comes standard with manual light switches
located next to each light for displaying your
products through a glass door. If manual light
switch is left on for an extended period of time it
may increase the cabinet temperature,
especially in close proximity to the light at the
top and cause the refrigeration system to run
longer.