Perlick Residential Refrigeration, Руководство пользователя

Страница: 29 / 50

www.bringperlickhome.com
30
adjustable digital temperature controller and
LED display. The controller can be adjusted
through a range of 30 F to 42 F. The refrigerator
controller has been factory set to modulate from
34 F to 40 F. To properly determine product
temperature see “CHECKING PRODUCT
TEMPERATURE” on page 44.
IMPORTANT NOTE: ALWAYS ALLOW
CABINET TO RUN FOR A MINIMUM OF 24
HOURS TO ALLOW TEMPERATURE
STABILIZATION AFTER START-UP BEFORE
STORING PERISHABLE ITEMS.
This cabinet is a frost-free model meaning the
evaporator (cooling coil) automatically defrosts
during off cycles. The controller also has a
manual defrost soft button on the front panel
signified by a melting snowflake, which has been
disabled on this model.
PROPER PRODUCT STORAGE
Store product as desired. Do not block internal
louvers or fan guard openings, as this will
decrease operating performance.
CONTROL SETTINGS
The cabinet is shipped with the controller turned
ON. To turn the refrigeration system OFF or ON
press the blue soft button on the front face of the
controller (if the controller is turned off with
power applied to the cabinet the LED display will
read OFF, when turned on it will read a
temperature). The controller is on the top front
face of the cabinet above the left door and is
equipped with a tinted see-through lens which
opens by pulling out on the bottom of the lens
and rotating upwards. Always ensure lens cover
is closed before closing door to avoid damage to
the controller or lens.
The refrigerator electronic control comes preset
for a product temperature of approximately 38 F
with a product temperature adjustability range of
33 F to 45 F. To change temperature controller
settings see section “TEMPERATURE
CONTROLLER ADJU
STMENTS”
on page 42.
IMPORTANT NOTE: THE LED DISPLAY IS
READING ACTUAL AIR TEMPERATURE NOT
PRODUCT TEMPERATURE. UNDER THESE
CONDITIONS, A 6 F AIR TEMPERATURE
SWING IN THE REFRIGERATOR
COMPARTMENT DOES NOT CHANGE THE
ACTUAL PRODUCT TEMPERATURE.
PRODUCT TEMPERATURE REMAINS AT A
VERY STABLE TEMPERATURE.
LIGHT SWITCH AND BULB
Your Three-Door All-Refrigerator has three
interior lights that are illuminated when each
respective door is opened. The cabinet also
comes standard with manual light switches
located next to each light for displaying your
products through a glass door. If manual light
switch is left on for an extended period of time it
may increase the cabinet temperature,
especially in close proximity to the light at the
top and cause the refrigeration system to run
longer.
THREE DOOR ALL-WINE
COOLER OPERATION
The Perlick Three Door All-Wine Cooler
(H3WOO) comes equipped with a state of the
art refrigeration system. The compressor is of a
variable speed variety, which automatically
changes speeds based on system conditions
and load. The cabinet is equipped with an
adjustable digital temperature controller and
LED display. The controller can be adjusted
through a range of 40 F to 65 F. The wine
cooler controller has been factory set to
modulate from 53 F to 57 F. To properly
determine product temperature see “CHECKING
PRODUCT TEMPERATURE” on page 44.
IMPORTANT NOTE: ALWAYS ALLOW
CABINET TO RUN FOR A MINIMUM OF 24
HOURS TO ALLOW TEMPERATURE
STABILIZATION AFTER START-UP BEFORE
STORING PERISHABLE ITEMS.
This cabinet is a frost-free model meaning the
evaporator (cooling coil) automatically defrosts
during off cycles. The controller also has a
manual defrost soft button on the front panel
signified by a melting snowflake, which has been
disabled on this model.
PROPER PRODUCT STORAGE
This wine cooler will accommodate 138 bottles
of wine. Specially designed full extension wine
racks allow for proper horizontal storage of the
wine. The cork remains moist, which keeps air
from entering the bottle. Do not block internal
louvers or fan guard openings, as this will
decrease operating performance.