Perlick Residential Refrigeration, Руководство пользователя

Страница: 37 / 50

www.bringperlickhome.com
38
CHECKING PRODUCT
TEMPERATURE
To accurately check the temperature of the
product stored in a refrigerated compartment,
insert an accurate thermometer into a plastic
(non-breakable) bottle, partially filled with water.
Tighten the bottle cap securely.
Place the bottle in the desired area for 24 hours.
Refrain from opening the unit during the testing
period. After 24 hours, check the temperature of
the water. Adjust the control settings if
necessary and re-test.
Your Perlick refrigerated cabinets are pre-set in
order to achieve the recommended temperature
range when installed in a 70 F ambient room
temperature. Factors, which affect the internal
temperatures of the refrigerated cabinet, include:
Temperature setting.
Room temperature where installed.
Number of times the door is opened and
closed.
Length of time the door is left open.
Adjacent compartment temperatures.
Style of door installed.
Door gasket sealing and condition.
Amount of time the internal light is illuminated.
Installation in direct sun light or near a heat
source
.
LIGHT BULB REPLACEMENT
To replace a defective or burnt out light bulb, simply
remove the glass lens by pulling down, unscrew the
bulb counterclockwise and replace with an identical
25-Watt bulb or smaller. Perlick
Replacement Bulb Number 63716-1.
MAINTENANCE
CLEANING
To clean stainless steel exterior or interior
surfaces, use a soft, non-abrasive stainless steel
cleaner to wipe down the these surfaces. If you
have difficulty finding a good cleaner, try
Signature Polish from Signature Limited
Laboratory, P.O. Box 13436, Dayton, Ohio
45413-0436; or call toll free at 877/376-5474.
Glass door panels can be cleaned using any
standard
glass cleaner available on the market today.
To clean interior and exterior non-metallic
surfaces and removable parts, wash with a mild
solution of soap and lukewarm water with a little
baking soda. Rinse and dry thoroughly. Avoid
getting water on lights, controllers, fan motors,
and unfinished wood
wine rack faces.
CAUTION
DO NOT USE ABRASIVE CLEANERS OR
CLOTHS ON ANY OF THE INTERIOR OR
EXTERIOR SURFACES OR REMOVABLE
PARTS.
CONDENSER CLEANING
WARNING
FOR CLEANING THE CONDENSER AND
OTHER ROUTINE MAINTENANCE, SHUT OFF
ELECTRICITY
TO THE UNIT.
In all instances, you should clean the condenser
area every three months. The condenser is
located behind the louvered toe plate. To clean
the condenser remove the toe plate and use a
soft bristle brush and vacuum to remove dust
and lint. Avoid damaging or crushing the
condenser fins or tubing. Upon completion, re-
install the louvered toe plate.
CAUTION
FAILURE TO CLEAN THE CONDENSER
COULD RESULT IN TEMPERATURE LOSS
OR MECHANICAL FAILURE OR DAMAGES.
CLEAN THIS AREA EVERY
THREE MONTHS .