7
Perlick is committed to continuous improvement. therefore, we reserve the right to change specifications without prior notice.
reversing Door hinge
Form no. Z2279
rev 08.01.07
Tools Required
■
Phillips Screwdriver.
■
#4 allen Wrench.
■
Flathead Screwdriver or Putty Knife
Right hinged door
(as shipped from factory)
Operations to Perform on Cabinet
STEP 1:
remove bottom hinge pin from
assembly.
STEP 2:
Carefully lift and tilt out door
assembly from the unit and
set aside.
STEP 3:
remove lock rail from
cabinet, requires removal of
four screws.
STEP 4:
remove top hinge pin.
remove top and bottom hinge
brackets from the unit.
STEP 5:
remove hinge bushing from
bottom hinge bracket and
assemble to top hinge bracket.
STEP 6:
taking care not to scratch the sur-
face, remove hole plugs from the
left hinge holes.
STEP 7:
insert hole plugs into vacant right
hinge holes
STEP 8:
re-assemble hinge brackets to unit. bottom right bracket
is assembled as the top left bracket. top right bracket is
assembled as the bottom left bracket.
STEP 9:
re-insert top hinge pin.
STEP 10:
re-assemble lock rail from
SteP #3
Operations to Perform on door
STEP 11:
remove bottom door hinge bracket from door assembly
and remove door hinge bushing from bracket.
re-assemble door hinge bracket to previous position,
without bushing.
STEP 12:
remove top door hinge bracket from door assembly and
assemble door hinge bushing from SteP 11 to bracket.
re-assemble door hinge bracket to previous position
with bushing attached.
STEP 13:
remove handle and reposition in other set of pre-drilled
mounting holes directly underneath..
STEP 14:
remove lock retainer and install on opposite end of
door..
STEP 15:
What was the door top is now the door bottom. Carefully
lift the door onto the hinge brackets of the cabinet. the
two hinge bushings should meet. reinsert the bottom
hinge pin to complete the door switching operation.
Step #12
Step #11
Step #13
Step #14
Step #6
Step #7
Remove
these screws
Top Hinge Bracket Bottom Hinge Bracket
Top Hinge Bracket
Bottom Hinge Bracket
Hinge Bushing
