Perles HSW4186, Руководство по эксплуатации, Страница: 13 / 122

15
Dear Customer,
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
Thank you for buying a Perles power tool.
Should you have any questions, vagueness or second
thoughts about our products, we recommend you to
contact our experts in Sales and Service Departments,
who will advise you and help you find the right answers to
the
set questions. Please, call us on the telephone
41 (0) 32 376 01 20.
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control of
the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery or
long hair can be caught in moving parts.
Perles, Elektrowerkzeuge & Motoren AG. CH-2542
Pieterlen, Buettenbergweg 5.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used.
Use of these
devices can reduce dust related hazards.
PARTS LIST
Pos. Pos.
1 Reducing gearbox 37 Screw
2 Cover of reducing 38 Bearing
gearbox 39 Holder
3 Spindle 40 Rotor
4 Pair of toothed 45 Stator
whee
ls
46 Conductor
6 Washer 47 Conductor
7 Washer 50 Handle
8 Seal 52 Pawl
9 Spacer 53 Spring
10 Retaining ring 54 Switch
11 Lead 55 Lead
15 Bearing 56 Bridge
16 Nut 57 Screw
17 Washer 60 Pad
18 Flange nut 61 Guard
19 Flange 64 Support
20 Bearing 65 Handle assembly
21 Screw 69 Washer
22 Screw 70 Nut
23 Screw 71 Plate
24 Washer 72 Handle
30 Motor gerabox 78 Plate
31 Orifice 80 Supply cord, plug
32 Brush holder 83 Electronic block
33 Cover 84 Line-up terminal
34 Brush (pair) 85 Spanner
36 Cup
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power
tool for your application.
The correct power tool will
do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools.
Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool.
Power tools are dangerous in the hands
of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power tools
operation. If damaged, have the power
tool
repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed.
Use of the power tool
for operations different from those intended could
result in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.