Perle S-10GT Media Converter Installation Guide
2
Overview
This document contains instructions necessary for the installation
and operation of the Perle S-10GT Standalone Media Converters.
Each media converter contains one pluggable transceiver port that
permits insertion of a SFP+ / XFP fiber module or SFP+ / XFP
copper module and one integrated RJ-45 (copper) port. These
media converter can use either Perle Systems or third party MSA
compatible 10G XFP or SFP+ modules including support for the
following standards: 10GBase-SR, 10GBase-LR, 10GBase-ER,
10GBase-LRM and 10GBase-ZR. The S-10GT supports one low
power transceiver (SFP+), whereas the S-10GT-XFPH supports
one high power (up to power level 4) transceiver (XFP).
Note: The S-10GT Media Converter can operate as a 1G Media
Converter if a 1G fiber transceiver has been inserted into the
SFP+ transceiver port.
Visit Perle’s web site for the most up to date Installation guides,
models and specifications:
http://www.perle.com/
Getting to know your S-10GT Media Converter
Your S-10GT Media Converter consists of the following items:
•
S-10GT chassis with one RJ-45 port and one transceiver port
•
Grounding screws (for improved chassis grounding)
•
Country specific power adapter
•
Power cord strain relief clip
•
Four rubber feet
•
This guide
Model
Port 1
Port 2
S-10GT-SFP
SFP+
RJ-45
S-10GT-XFPH
XFP
RJ-45
