Perle IDS-710 Скачать руководство пользователя

Страница: 4 / 29

IDS-710 Hardware Installation Guide

Preface

Audience

This guide is for the network or computer technician responsible for installing Perle IDS

Switch. Familiarity with the concepts and terminology of Ethernet and local area networks

is required.

Purpose

This document describes the hardware and physical characteristics of the Perle IDS

Switch. It covers hardware features as well as installation and operation of the switch.

This document does not cover how to configure your Perle IDS Switch. Information to

configure your Perle IDS Switch can be found in the IDS PRO Feature Set User Guide.

Package Contents

• IDS Switch with attached DIN rail mounting bracket

• IDS-710 Switches Quick Start Guide

Document Conventions

This document contains the following conventions:

Most text is presented in the typeface used in this paragraph. Other typefaces are used to

help you identify certain types of information. The other typefaces are:

Note:

Means reader take note

: notes contain helpful suggestions.

Caution:

Means reader be careful. In this situation, you might perform an action that

could result in equipment damage or loss of data.

Warning

IMPORTANT SAFETY INSTRUCTIONS

Means danger. You are in a situation that could cause bodily injury. Before you work on

any equipment, be aware of the hazards involved with electrical circuitry and be familiar

with standard practices for preventing accidents. Only qualified personnel should connect

power to this unit.

Содержание IDS-710






























Результаты поиска

Содержание IDS-710

Отзывы:

Похожие инструкции для IDS-710

Бренды по названию

Популярные бренды

Perle IDS-710, Руководство по установке оборудования

Результаты поиска

Содержание IDS-710

Отзывы:

Похожие инструкции для IDS-710

Бренды по названию

Популярные бренды