IDS-108FPP Installation Guide
16
•
Multimode 50/125 or 62.5/125 micron fiber cable
•
Single mode 9/125 micron fiber cable
Connect the fiber cable to Port 9 and Port 10 (if
installed) on the IDS and the other cable end to a fiber
compliant device. If you are making your own fiber
cables, remember that the RX on one side needs to go
to TX on the other side and vice versa. See diagram
below.
Switch Properties
•
IEEE 802.3 for 10Base-T
•
IEEE 802.3u for 100Base-TX and 100Base-FX
•
IEEE 802.3x for Flow Control
•
IEEE 802.3af Power Over Ethernet
•
IEEE 802.3at Power Over Ethernet
Содержание IDS-108FPP series
Страница 4: ...IDS 108FPP Installation Guide 4 Front View of IDS 108FPP 8 port RJ 45...
Страница 5: ...IDS 108FPP Installation Guide 5 Front View of IDS 108FPP with one or two fiber ports...
Страница 8: ...IDS 108FPP Installation Guide 8 Views for the IDS 108FPP...
Страница 9: ...IDS 108FPP Installation Guide 9...