Perle IDS-108FPP series, Руководство по установке

Страница: 10 / 20

IDS-108FPP Installation Guide 10
Mounting the IDS-108FPP on a DIN-rail
1. The DIN-rail clip will be fixed to the back panel of
the IDS-108FPP switch when you receive the
product.
2. Position the IDS-108FPP such that the top of the
DIN rail fits into the slot on the top of the DIN-rail
clip, just below the DIN-rail hook and behind the
spring.
3. While pushing down on the unit to compress the
spring, rotate the bottom of the IDS-108FPP toward
the rail. This will snap the bottom of the rail into the
bottom of the clip. See diagram below.
Note: To remove the IDS-108FPP from the DIN-rail,
push down slightly on the IDS-108FPP unit while
pulling the bottom out.