Perle 10/100 Media Converter Module – Installation Guide
12
Installing the Simplex Fiber Cable
•
Locate a 10/100Base-X compliant simplex (1 strand) fiber
cable with appropriate connectors.
•
Connect the fiber cable from one Media Converter Module to
the other Media Converter/switch/fiber device.
Installing the Copper Cable
•
Locate 10/100Base-T compliant copper cables with male,
RJ-45 connectors installed at both ends.
•
Connect the RJ-45 cable between the Perle Media
Converter Module and the device.
Note: The Perle Media Converter Module supports Auto-MDIX
which allows a straight-through or cross-over Ethernet cable. See
page 4 in this guide for jumper positions.
