Perle 10/100 Media Converter Module – Installation Guide
8
Duplex (copper) (Switch 4)
Switch Position Mode
Up (default)
Full
Down
Half
Note: When Auto Negotiation (SW1) is set to Off, the Media
Converter will use this Duplex setting for its copper connection.
Up: The Media Converter Module will be set to Full Duplex mode.
Down: The Media Converter Module will be set to Half Duplex
mode.
Speed (copper) (Switch 5)
Switch Position Mode
Up (default)
100
Down
10
Note: When Auto Negotiation (SW1) is set to Off, the Media
Converter Module will use this Speed setting for its Ethernet
copper connection.
Up: The Media Converter will be fixed at 100 Mbps.
Down: The Media Converter will be fixed at 10 Mbps.
