Perkins 403F-E17T 404F-E22T Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 108

background image

4.

Disconnect all electronic components from the

wiring harnesses. Include the following
components:

• Electronic components for the driven

equipment

• ECM

• Sensors

• Electric operated fuel pump

• Electronically controlled valves

• Relays

NOTICE

Do not use electrical components (ECM or ECM sen-
sors) or electronic component grounding points for
grounding the welder.

Illustration 39

g01075639

Use the example above. The current flow from the
welder to the ground clamp of the welder will not
damage any associated components.

(1) Engine
(2) Welding electrode
(3) Keyswitch in the OFF position
(4) Battery disconnect switch in the open position
(5) Disconnected battery cables
(6) Battery
(7) Electrical/Electronic component
(8) Minimum distance between the component that is being

welded and any electrical/electronic component

(9) The component that is being welded
(10) Current path of the welder
(11) Ground clamp for the welder

5.

Connect the welding ground cable directly to the

part that will be welded. Place the ground cable as
close as possible to the weld in order to reduce the
possibility of welding current damage to the
following components. Bearings, hydraulic
components, electrical components, and ground
straps.

Note:

If electrical/electronic components are used as

a ground for the welder, or electrical/electronic
components are located between the welder ground
and the weld, current flow from the welder could
severely damage the component.

6.

Protect the wiring harness from welding debris and

spatter.

SEBU9075-03

73

Maintenance Section

Welding on Engines with Electronic Controls

«
...
71
72
73
74
75
...
»

Содержание 403F-E17T 404F-E22T













































































































Отзывы:

Нет отзывов

Похожие инструкции для 403F-E17T 404F-E22T

Бренд: VEM Страницы: 27

Бренд: Painless Performance Страницы: 24

RailKing RKS SD70ACE

Бренд: M.T.H. Страницы: 12

Бренд: RHINO MOTION CONTROLS Страницы: 4

Бренд: Flux Страницы: 16

Бренд: E-MAG Страницы: 30

Бренд: Shindaiwa Страницы: 44

Бренд: WÄRTSILÄ Страницы: 522

MaxxForce DT 10

Бренд: Navistar Страницы: 109

Бренд: TOPMAQ Страницы: 17

Бренд: Kohler Страницы: 160

Torqmotor TF Series

Бренд: Parker Страницы: 44

Бренд: MTD Страницы: 32

Бренд: Lombardini Страницы: 88

Бренд: Hacker Страницы: 8

Бренд: Hacker Страницы: 8

Бренд: Hacker Страницы: 38

Бренд: ST. SpA Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды