Perkins 2806J-E18TTA Скачать руководство пользователя страница 76 | Manualshive

Страница: 76 / 100

Perkins 2806J-E18TTA Скачать руководство пользователя страница 76

5.

Start the engine and Inspect the cooling system for

leaks and for proper operating temperature.

i06606851

Cooling

System

Coolant

Level

-

Check

Check

the

coolant

level

when

the

engine

is

stopped

and

cool.

Illustration 42

g00285520

Cooling system filler cap

Pressurized System: Hot coolant can cause seri-
ous burns. To open the cooling system filler cap,
stop the engine and wait until the cooling system
components are cool. Loosen the cooling system
pressure cap slowly in order to relieve the

pressure.

1.

Remove the cooling system filler cap slowly to

relieve pressure.

2.

Maintain the coolant level within 13 mm (0.5 inch)

of the bottom of the filler pipe. If the engine is
equipped with a sight glass, maintain the coolant
level to the proper level in the sight glass.

Illustration 43

g00103639

Typical filler cap gaskets

3.

Clean the cooling system filler cap and check the

condition of the filler cap gaskets. Replace the
cooling system filler cap if the filler cap gaskets are
damaged. Reinstall the cooling system filler cap.

4.

Inspect the cooling system for leaks.

i03644948

Cooling

System

Supplemental

Coolant

Additive

(SCA)

-

Test/

Add

Cooling system coolant additive contains alkali.
To help prevent personal injury, avoid contact
with the skin and the eyes. Do not drink cooling
system coolant additive.

Test for SCA Concentration

Heavy-Duty Coolant/Antifreeze and SCA

NOTICE

Do not exceed the recommended six percent supple-
mental coolant additive concentration.

76

M0109073

Maintenance Section
Cooling System Coolant Level - Check

«
...
74
75
76
77
78
...
»

Содержание 2806J-E18TTA





































































































Отзывы:

Нет отзывов