PerkinElmer Raman IdentiCheck Скачать руководство пользователя страница 67

Страница: 67 / 78

Maintenance and Troubleshooting . 67

Servicing the Spectrometer

There are no other user-serviceable parts in the spectrometer module. If you require an

instrument service please contact PerkinElmer. Only PerkinElmer Service Engineers should

attempt to service the spectrometer.

WARNING

Removal of the spectrometer from its transport case, or removal of the

either of the spectrometer panels, will allow potentially hazardous

Class 3B laser radiation to be emitted and will invalidate the instrument

warranty.

Cleaning the Air Filters

The air filters are located on the right-hand panel of the spectrometer module. You should

clean the filters regularly.

To clean the filters:

Disconnect the power supply unit from the mains supply.

Unclip the filter covers (see Figure 10), remove the filters and wash in a mild detergent.

Dry the filters thoroughly.

Fit the air filters back into the spectrometer module.

Maintaining the Triggered Fiber Optic Probe

The TFOP is designed to be maintenance free under normal operating conditions, and should

not be opened or adjusted by anyone other than a PerkinElmer Service Engineer. Contact

PerkinElmer if you have any questions regarding maintenance or servicing of the TFOP.

Damage to the TFOP as a result of accident, neglect, misuse, or as a result of service or

modification by anyone other than PerkinElmer will invalidate the TFOP warranty.

Cleaning the Triggered Fiber Optic Probe

NOTE: We recommend the use of non-abrasive, pH-neutral, phosphate-free detergents.

Some detergents, particularly those designed for use in washing machines, are

alkaline and may etch non-ferrous metals and some plastics. The product chosen

must be capable of being fully removed by wiping with a damp cloth.

Decontaminating the probe tip

Wipe the barrel and tip using, for example, the recommended concentration of a standard

laboratory detergent, clean off the detergent using a cloth dampened with de-ionized water

and then air dry.

Содержание Raman IdentiCheck















































































Результаты поиска

Содержание Raman IdentiCheck

Отзывы:

Похожие инструкции для Raman IdentiCheck

Бренды по названию

Популярные бренды

PerkinElmer Raman IdentiCheck, Руководство по началу работы

Результаты поиска

Содержание Raman IdentiCheck

Отзывы:

Похожие инструкции для Raman IdentiCheck

Бренды по названию

Популярные бренды