PerkinElmer Lambda 365 Скачать руководство пользователя страница 2

Страница: 2 / 70

2 . Lambda 365 Users Guide

Release History

Part Number Release

Publication Date

09931249

September 2016

Any comments about the documentation for this product should be addressed to:

User Assistance

PerkinElmer

710 Bridgeport Avenue

Shelton, CT 06484-4794

U.S.A.

Or emailed to: [email protected]

Notices

The information contained in this document is subject to change without notice.

Except as specifically set forth in its terms and conditions of sale, PerkinElmer makes no

warranty of any kind with regard to this document, including, but not limited to, the

implied warranties of merchantability and fitness for a particular purpose.

PerkinElmer shall not be liable for errors contained herein for incidental consequential damages in

connection with furnishing, performance or use of this material.

Copyright Information

This document contains proprietary information that is protected by copyright.

All rights are reserved. No part of this publication may be reproduced in any form whatsoever or

translated into any language without the prior, written permission of PerkinElmer, Inc.

Trademarks

Registered names, trademarks, etc. used in this document, even when not specifically marked as such,

are protected by law.

PerkinElmer is a registered trademark of PerkinElmer, Inc.

Содержание Lambda 365







































































Результаты поиска

Содержание Lambda 365

Отзывы:

Похожие инструкции для Lambda 365

Бренды по названию

Популярные бренды

PerkinElmer Lambda 365, Руководство пользователя

Результаты поиска

Содержание Lambda 365

Отзывы:

Похожие инструкции для Lambda 365

Бренды по названию

Популярные бренды