Pericom Software Compaq t5300, Руководство пользователя

Страница: 190 / 342

11-6
IBM 5250 Emulation
Insert mode can be disabled by pressing the Insert key again, pressing the Reset
key, or by performing any action that sends data to the host, such as pressing the
Enter, Clear, or PF keys.
Indicates when input from the keyboard or mouse will not be accepted by the host.
When this is because an error has occured, as shown in the error line, pressing the
Reset key will remove the error. Alternatively, more information can be obtained
by pressing the Help key. The only other keys available are Attn, SysReq and
Print. Note that the emulation includes typeahead capability so that in most cases
you can continue to enter data without waiting for the Do Not Enter message to
clear as the data will be stored until the host is ready.
Keyboard Mapping
The following illustration shows where IBM 5250 keyboard functions are mapped to
keys on the 101/102 key Enhanced AT keyboard layout. Special key functions that are
provided on the IBM 5250 keyboard can be mapped to any key on your keyboard by
using the AS virtual key names listed in the Define Keyboard Macros dialog box.
Word Processing Mode
The following keyboard functions are available when the IBM 5250 emulation is in
Word Processing mode:
Symbols Command Alt + A
Begin Bold Alt + B
Centre Text Alt + C
Next Text Column Alt + D
Half-Index Down Alt + H
End Attribute Alt + J
Find Stop Code Alt + N
Start New Page Alt + P
Required Page End Alt + R
Insert Stop Code Alt + S
Begin Underline Alt + U
Word Underline Alt + W
Half-Index Up Alt + Y
Beginning of Line Alt + Cursor Left
End of Line Alt + Cursor Right
Top of Page Alt + Cursor Up
End of Page Alt + Cursor Down
Insert Carrier Return Alt + Field Exit
Required Space Alt + Space
Required Tab Alt + Tab