Peri MULTIPROP, Инструкция по сборке и эксплуатации, Страница: 32 / 58

30
1.8/1.9
6,5
8
6.1
U1
0
0-U1
40
6.4
6.2
MULTIPROP System
Instructions for Assembly and Use – Standard Configuration
A6 Accessories
MULTIPROP Strap
U100 – U140
For transferring high loads, steel walers
as the main beam can be connected to
the props during the assembly of a
slab table instead of twin main beams
consisting of GT 24 Girders.
One MULTIPROP Strap U100 – U140 is
assembled to each prop.
Assembly
1. Release Hex. Nut M16 (6.4).
2. Swivel suspension fastenings (6.1)
outward.
3. Guide the strap over the steel waler
from the top. (Fig. A6.01a)
4. Align the tappet of the plate (6.2) be-
tween the webs of the steel walers.
5. Swivel back in the suspension
fastenings (6.1) and hook them into
the bores of the base or head plate
(1.8 or 1.9).
6. Tighten Hex. Nuts M16. (Fig. A6.01b)
The strap holds the steel waler in
position on the prop.
Releasing
1. Release Hex. Nut M16 (6.4).
2. Pull out suspension fastenings from
the drilled holes of the base or head
plate and remove strap.
Connecting MULTIPROP
with MPB 24
For transferring high loads, the
MULTIPROP Aluminium Beam MPB 24
can be used as the main beam.
Assembly
Assembly takes place with two diago-
nally-arranged MULTIPROP Straps MPB
24 (6.5) and MP Bolts with Nuts (8).
(Fig. A6.02)
Fig. A6.02
Fig. A6.01a Fig. A6.01b
AuV MULTIPROP EX.indb 30 07.01.16 11:57