Peri MULTIPROP, Инструкция по сборке и эксплуатации, Страница: 18 / 58

16
MULTIPROP System
Instructions for Assembly and Use – Standard Configuration
A2 MULTIPROP System
Tilting Forkhead MKK
Technical data
Permissible load-bearing capacity:
see MULTIPROP System type test.
The Tilting Forkhead MKK (5) with
quick-action clamp coupling can be
pivoted by 3° on all sides. It serves
to securely accommodate one or two
GT 24 or VT 20 Girders for non-horizontal
slab formwork.
(Fig. A2.15)
Alternatively
Alu Beam MPB 24
Assembly
1. Insert centring pins (5.3) of the base
plate (5.1) into the drilled holes of
the prop base plate (1.8) or head
plate (1.9).
2. Hit clamping claws (5.2) with a
hammer over the prop base plate or
head plate.
3. Spindle Tilting Forkhead MKK with ro-
tary wings (5.4) to size. Max. spindle
extension: 100 mm. (Fig. A2.16)
– Horizontal forces are to be safely
transferred.
– When under load, the rotary wing can
be turned by means of a nail puller.
– Never loosen the rotary wings with
force e.g. hammer blow. Risk of
breakage! (Fig. A2.16a)
Releasing
Spindle props without load!
1. Open clamping claws (5.2) using
a hammer.
2. Remove Tilting Forkhead MKK.
Fig. A2.16
Fig. A2.16a
Fig. A2.15
5
5
5.4
5.4
5.2
5.2
5.1 + 5.3
5.1 + 5.3
1.8/1.9
1.8/1.9
≤ 40
0
3°
AuV MULTIPROP EX.indb 16 07.01.16 11:55