46
CB 240 Climbing Formwork
Instructions for Assembly and Use – Standard Configuration
B2 Assembly of the Formwork Elements
TRIO Element
Mounting of Strongback CB on TRIO
Elements
1. Assemble TRIO elements on the as-
sembly area to form formwork units.
2. Fix Connector TRIO-CB (4.5) to panel
struts with hook clamps Ø 25 (4.7),
see plans for arrangement. Centre di-
stance = bracket spacing. By changing
the mounting position of the spindle
(4.8), the Connector TRIO-CB can be
cantilevered to the left or right.
(Fig. B2.13 + B2.13a)
Connections are possible on horizontal
and vertical panel struts through repo-
sitioning of the hook clamps, see C1
Horizontal Strut Connection.
(Fig. B2.14 – B2.14c)
3. Place Strongback CB (4) on the con-
nectors. Bottom projecting length: see
Planning or C1.
4. Attach Strongback CB to bottom
connector using bolts and cotter pins
(4.6).
5. Adjust height on bottom connector
using spindle (4.8).
6. Adjust height of top connector.
7. Fix Strongback CB at top. (Fig. B2.15)
In order to prevent any diagonal pull,
a piece of timber (4.10) is clamped
between the top ends of the Strong-
backs, see C1, Installation of Com-
pression Brace.
(Fig. B2.16)
Alternatively, the Lifting Beam RCS 10 t
(Item no. 112986) can be used for the
moving procedure.
On horizontal struts
Connector TRIO-CB
left cantilevering
right cantilevering
Fig. B2.15
Fig. B2.14
Fig. B2.14a
Fig. B2.14b
Fig. B2.14c
Fig. B2.13
Fig. B2.16
β
≤ 45°
left
cantilevering
right
cantilevering
On vertical struts
left
cantilevering
right
cantilevering
4.10
4.8
4.8
4.7
4.7
4.5
4.5
4.6
4.6
Fig. B2.13a
AuV CB 240 EX.indb 46
29.06.16 09:45
