background image

 

14

     performaxopeners.com   Customer Service: 1-877-436-4402

INSTALLING EMERGENCY RELEASE HANDLE 

Look in the box for:

Emergency Release Handle 

 To prevent SERIOUS INJURY: 
•  In case of power outage or door obstruction, PULL 

EMERGENCY HANDLE to release door from opener. 

•  When trolley is disengaged, (trolley lever pointing 

down) door can be operated manually.

•  To engage, flip the trolley lever up so it is horizontal. 

Trolley will automatically re-engage when garage 
door opener is activated. 

•  DO NOT use emergency handle to pull the door 

open or close. 

WARNING

* VERY IMPORTANT! *

Emergency release handle must clear all vehicles. An emergency release handle set too low may get caught 
by the vehicle and cause damage to the opener. Measure from the floor to the top of your vehicle and set the 
emergency release handle above this measurement. 

Thread end of rope through handle and secure with 
an over hand knot. Thread end of the rope through 
hole in trolley lever. 

Measure rope length so the handle is 6 feet  
(183 cm) above the floor and is clear from the top of 
your vehicle. Secure with a overhand knot. 

Hole in 
Trolley 
Lever 

Содержание 24220









































Отзывы: