24
INSTALLING THE CIRCLE CUTTING GUIDE
–
cont’d
4. Screw the internally threaded circle
cutting guide mounting disc (6) onto
the externally threaded circle cutting
guide mounting insert and hand
tighten.
NOTES:
a) Make sure the boss (7) on the cutting
guide mounting disc goes through the hole
in the circle guide.
b) Do not over tighten the circle cutting
guide mounting plastic parts. Hand tighten
only.
5. Adjust the circle cutting guide radius
by loosening the pivot point knob (8),
sliding it to the correct circle radius
and re-tightening in the desired
location.
NOTE:
Check circle cutting guide radius
setting by measuring from the pivot point
to the
outside
of the cutting bit.
CIRCLE CUTTING GUIDE OPERATION
WARNING:
Unplug the tool from
the power source before changing
accessories, changing bits and making
adjustments.
Before turning the tool ON, check to
make sure bit and all accessory
fasteners are securely tightened.
1. Mark the centre of the circle you wish
to cut on the workpiece and drill a
6 mm or 15/64" pilot hole.
2. Adjust cutting bit depth to 1/8" longer
than the thickness of the material to
be cut (Fig. 7).
ASSEMBLY AND OPERATING
!
Fig. 12
Содержание 241-0968
Страница 27: ...27 EXPLODED VIEW...
