Performax 241-0968, Руководство пользователя

Страница: 18 / 30

18
CUTTING BIT APPLICATIONS
Soft wood* refers to spruce, pine and fir (SPF)
NOTE:
Refer to the above chart for materials, material thickness, speed of the tool and
recommended cut feet per minute to be used with the various cutting bits. The speeds
referenced chart are intended as a guide only and must be adjusted according to
hardness, density and characteristics of the material being cut. Material thickness must
never exceed the length of the cutting flutes. Making practice cuts on a scrap workpiece
that is the same material as the good workpiece will assist you in selecting the speeds
that will produce the smoothest cut.
Cutting Bit Type Material and Thickness
Speed control
wheel setting
Recommended
Cut Feet per
Minute
1/4" (soft wood*,
fiberglass and laminate)
Fiberglass and laminate up
to 1/4" and soft wood* up to
1"
3
–6
1 ft./min
1/4" (windows and
doors) Drywall, gypsum board up to
5/8" 3
–6
1.5 ft./min
1/8" (soft wood*,
fiberglass and laminate) Fiberglass and laminate up
to 1/8", soft wood* up to 1" 3
–6
1 ft./min.
5/32" All purpose
(not included)
All materials and thicknesses
listed in this chart plus sheet
metal up to 1/32" thick 3
–6
0.5 to 1.5 ft./min.
depending upon
the material
1/8" Ceramic tile
(not included)
“Porous” ceramic wall tiles
up to 3/8"
3
–6
0.5 ft./min.
ASSEMBLY AND OPERATING