Performax 241-0968, Руководство пользователя

Страница: 23 / 30

23
CUTTING OUTLET OPENINGS IN DRYWALL
–
c
ont’d
10. The completed electrical box cut out
will be accurately and neatly cut
(Fig. 11).
NOTE: Always move the cutting bit in a
counter- clockwise direction around the
outlet box. The natural tendency of the
cutting bit to move to the left will make it
easier to cut close to the box.
INSTALLING THE CIRCLE CUTTING
GUIDE
The circle cutting guide accessory is ideal
for precision cutting of circles. This circle
cutting guide must be attached to the
freehand cutting guide.
1. Install the assist handle and install
and adjust the freehand cutting guide
on the tool as illustrated in
Fig. 1, 2, 3 & 7.
2. Insert the externally threaded circle
cutting guide mounting insert (1) into
the bottom of the freehand cutting
guide (2) (Fig. 12).
NOTE: Make sure the scallops of the
insert mate properly with the scallops
inside the freehand cutting guide foot.
3. Place the circle cutting guide
mounting hole (3) over the externally
threaded circle cutting guide mounting
insert (4).
NOTE: Make sure pointed pivot pin (5) is
pointing away from the tool.
ASSEMBLY AND OPERATING
!
Fig. 11
Fig. 12