CARE & MAINTENANCE
ACCESSORIES
WARNING: Unplug the drill before per-
forming maintenance or cleaning.
NOTICE: This Drill is lubricated before it
leaves the factory. This lubrication should
last for the life of the tool. No further
lubrication is required.
• Never immerse tool in liquid. Never let any
liquid inside tool housing.
• Clean with a damp cloth and mild soap. Do not
use solvents or harsh detergents.
• Check brushes periodically. Worn
brushes should be replaced by
qualified service personnel.
• Keep air vents clean and free from debris.
Blocked air vents can lead to overheating
Use only accessories that are recommended by the manufacturer for your model. Accesso-
ries that may be suitable for one tool may become hazardous when used on another tool.
Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets. If you
must use an extension cord, be sure that the gauge is large enough to carry the amount
of current necessary for your power tool. If not, your tool may experience a loss of power,
excessive voltage drop or overheating. The smaller the gauge number, the heavier the cord
(see table below).
Rely only on high-grade drills and drivers offered on our virtual shelves.
