Each fixture takes up 5 DMX Channels (See Above)
You have a cable from the controller to the first fixture cable, then from first to second and so on. The last
light then has a DMX terminator plugged in.
Fixture 1 would be set to DMX address 1
Fixture 2 would be set to DMX address 6
Fixture 3 would be set to DMX address 11
Fixture 4 would be set to DMX address 16
When setting these addresses, ensure that the fixture addresses dont overlap. You can set two fixtures to the
same address as long as they have the same channel layout, they will then perform in the same way.
We recommend you to read manuals for your DMX fixture and controller in full. Some controllers tell you
what each fixture address needs to be, and some equipment will need other settings changed before they will
work.
