background image

• Do not add liquids of any kind, especially flammable liquids to this machine or its intended fluid.   Use only 

water based fluid, specifically designed for effects machines. 

• Use high quality water-based liquid, recommended by your dealer to reduce clogging.

• During operation ensure there is sufficient fluid in the tank. Operating without fluid will damage the pump.

• If your machine fails to work disconnect immediately, remove all liquid and return in original packing to 

your dealer.

• Always drain the fluid and water tanks before transporting.

• Follow the cleaning and maintenance advice in this manual.

• If your machine fails to work, disconnect immediately, remove all liquid and return in original packing to 

your dealer.

Danger of Injury or Burns:

• For operation by adults only, ensure installation is away from the reach of children.

• Never leave the machine running unattended.

• Avoid all contact with the heater.

• Never aim the nozzle directly at people.

• Use only in a well ventilated area & do not cover the machine vents. In order to guarantee adequate 

ventilation, allow a free air space of at least 20cm around all sides of the machine.

• Effects fluids can cause irratation and injury, handle with care and keep out of the reach of children. Avoid

contact with the eyes and skin, if this occurs rinse with warm water.  If ingested call a doctor immediately.  

Before Use:

Before commencing setup check the machine has not been damaged in transit. In the event there is any

damage to the housing, cable or internal components contact your dealer immediately.

Contents Includes:

User Manual

PFX3000s

Power Cable

Wireless remote and receiver

Instructions

Specifications:

Code: PFX3000S

Mains Supply: 240Vac 50Hz

Power: 3000 Watts

Heat Up Time: 5 min

Dimensions: 480 x 265 x 220mm

Weight: 10kg 

Features Include:

A 3000 watt heater.

6L Fluid Tank.

Uses water based fog fluid.

Wireless Remote Control.

DMX controllability, 1 channels of control.

Features:

• Powerfull 3000 Watt Heater

• Very High Output

• DMX Control

• Large Fluid Tank

Содержание Fog Blaster 3000









Отзывы: