Set Up Menu:
The setup menu is used to adjust the different parameters of the smoke machine.
The MENU button is used to navigate through those menu options.
•
Addr:
Press enter, use the up and down buttons to adjust the DMX address, then press enter to save settings.
•
rENo:
Press enter to adjust the settings.
Here you have 5 setting: Gear, CH1, CH2, CH3, CH4, OFF, use the up and down buttons to choose one and
then press enter.
• Gear:
Allows you to use all 4 buttons, A=25% fog output, B=50% Fog output, C=75% output, D=100% fog output,
CH1,CH2,CH3,CH4 by choosing one of these you can choose what button activates the fog machine at full
output, this mode is useful when controlling multiple units from one controller. So by selecting CH1 this will
mean that the smoke machine works from button A, CH2 button B and so on.
•
NoFU:
Turns the low fluid function on and off. When the machine is low on fluid the display will flash. It is a good
ideal to leave this function ON(yes) as low fluid in the tank can damage the pump. Press enter and use the up
and down to select yes or no, then press enter again.
First Time Operation - Panel Control:
Before you start using this unit, please check there is no transportation damage, should there be any, please
do not use the device and contact your dealer immediately.
The PFX3000S is designed to be used with water based fog liquid, NEVER OIL BASED.
Put the smoke machine on a flat stable surface or hang from a suitable truss, make sure you use a safety wire.
Make sure no one can put any body part close to the heater output
Unscrew the Lid on the fluid bottle, fill up with a suitable fog liquid, make sure not to over fil. Then screw the
plastic cap back on. Make sure the tank never runs dry during operation.
Connect the PFX3000S to a suitable mains supply.There is a simple 4 button menu with LCD display on the
back of the unit, the 4 buttons control menu, up, down and enter.
When you first turn on the fog machine you will need to wait for around 3-5 minutes for the heater to warm
up. Then you will get access to the controls.
Press the menu button to scroll through options and use the up down buttons to make changes.
First Time Operation Wireless Controller:
Before you start using this unit, please check there is no transportation damage, should there be any, please
do not use the device and contact your dealer immediately.
• The PFX3000S is designed to be used with water based fog liquid, NEVER OIL BASED.
• Put the smoke machine on a flat stable surface or hang from a suitable truss, make sure you use a safety
wire. Make sure no one can put any body part close to the heater output.
• Unscrew the Lid on the fluid bottle, fill up with a suitable fog liquid, do not to overfill. Screw the plastic cap
back on and ensure the tank never runs dry during operation.
• Plug in the wireless receiver into the socket on the back labelled remote control.
• Connect the PFX3000S to a suitable mains supply.
• When you first turn on the smoke machine you will need to wait for around 3-5 minutes for the heater to
warm up, then you will gain access to the controls. Adjust the settings in the menu to suit.
• Once heated the smoke machine can be controlled via the wireless remote control.
