30
Section 10. GPS RECEIVER - INSTALLATION INSTRUCTIONS
Installation:
The GPS Receiver can be installed on the dash board looking up through the wind
screen. As long as the receiver has a clear unobstructed view of the sky, it will work properly, even if
sitting at an angle to the sky.
(It can also be installed under the dash looking up through the fiberglass. In this case you will need
to move the Velcro to the top of the GPS Puck or use a 2-sided industrial strength tape. The puck
must be mounted with top looking up to the sky).
On a new system, after connection and initial power up it will take up to 10 minutes for the GPS
Receiver to find its new location. Once a proper fix has been made,
GPS
will appear in the top left of
screen. (If after 10 minutes you do not see
GPS
, turn key off and back on and wait a few more
minutes).
Until a fix is made, it will appear as “
No GPS Fix”
. If you see “
No GPS Data
” on screen, then the
system does not see the Receiver connected. (Check plug in connection).
WARNING: ONLY connect into Master Module in port marked “GPS” or the Receiver will become
damaged.
