Perfect BG2, Руководство пользователя

Страница: 16 / 67

14
1.10.2 Overloading clutch P.T.O. shaft
To ensure correct functioning, friction clutches must be relieved prior to first time use and after lengthy periods of non-
use. To this end, the friction linings must be relieved of pressure and the clutch turned manually.
Notes on relieving of Type K96:
•
Uniformly tighten the nuts No. 3, thereby relieving the pressure on the friction disks.
•
Turn the clutch.
•
Subsequently unscrew the nuts No. 4 again up to the end of the thread.
1.10.3 Bearing houses / rotor shaft
To lubricate every 8 hours of operation. Grease nipples.
1.10.4 Rear roller
To lubricate every 8 hours of operation.
1.10.5 Parallelogram offset
To lubricate every 8 hours of operation.
If possible lubricate with Total Lical EP/ ELF EPEXELF 2 or an equivalent grease.
Viscosity base oil 40°C 190 - 220 Cst.
Thickener Lithium/Calcium compatible.
Temperature range -25°C tot 130°C
Good pressure properties.