Perfect BG2, Руководство пользователя

Страница: 11 / 67

9
prescribed speed of the machine. The machine speed is indicated on a decal on the gearbox-cover.
9. Before you engage the tractor P.T.O. you must check if nobody, also children and animals, is nearby the machine.
10. Never engage the tractor P.T.O. when the tractor motor is shut-off.
11. Disengage the tractor P.T.O. when the angle of the P.T.O. shaft becomes to big.
12. Be aware that the machine will still run for a while after you have disengaged the tractor P.T.O. Do not come close
to the machine while it is still running.
Only when the machine completely stands still, it is allowed to start adjustment-, cleaning-, service- and/or repair-
work.
13. Adjustment, cleaning-, service- and / or repair-work are only allowed to be done when the tractor P.T.O. shaft is
disengaged, the motor shut-off and the tractor key is pulled out.
14.
The disconnected P.T.O. shaft must by ‘stored” by the corresponding chain.
15. After you have disconnected the P.T.O. shaft you must replace the tractor P.T.O. shaft cover directly
1.2.3 Service
1. During adjustment-, cleaning- and service-work, but also when you have to remove an object out of the machine
you must disengage the tractor P.T.O. shaft , shut-off the motor and pull the tractor key out.
2. Check at regular times (at least every 8 hours) all bolts and nuts. Re-tight them if necessary.
3. Use adequate supports when you have to work under a lifted machine.
4. Use always correct tools and wear gloves when you replace flails.
5. Collect used and excess oil and grease for environment friendly disposal.
6. Check at regular times (at least every 8 hours) the condition of the protection elements and wear-off parts. replace
them if necessary.
7. Disconnect the dynamo ánd the battery during electric welding-work
8. Re-placement parts must comply at least the manufacturer specifications.
You do not have doubts when you use original PERFECT parts !!!
1.3 Technische Specifications
BG2/BK2
– 105
BG2 / BK2
– 120
BG2 / BK2
– 135
Cutting width cm 105 120 135
Speed flail rotor omw./min. ± 2100 ± 2100 ± 2100
Quantity of flails n – 2,2Kg (0,9Kg) 6 (12) 8 (12) 8 (12)
Minimum tractor power kW/pk 22 / 30 26 / 35 27 / 37
Maximum tractor power (without overload clutch) kW/pk 30 / 41 35 / 48 37 / 50
Cutting height cm 5 – 10 5 – 10 5 – 10
Coupling Kat. I / II I / II I / II
Offset to the recht (from middle point of the tractor) cm 65 80 95
Machine width cm 125 142 155
Machine height cm 950 950 950
Machine depth (from pin 3-point) cm 125 125 125
Machine weight Kg 485 / 515 515 / 545 540 / 575
Noise level in tractor driver area 70 dB(A)
BG2/BK2
– 150
BG2 / BK2
– 180
BG2 / BK2
– 210
Cutting width cm 150 180 210
Speed flail rotor omw./min. ± 2100 ± 2100 ± 2100
Quantity of flails n – 2,2Kg (0,9Kg) 9 (16) 12 (20) 12 (20)
Minimum tractor power kW/pk 30 / 40 33/ 45 38 / 52
Maximum tractor power (without overload clutch) kW/pk 55 / 75 55 / 75 55 / 75
Cutting height cm 5 – 10 5 – 10 5 – 10
Coupling Kat. I / II I / II I / II
Offset to the recht (from middle point of the tractor) cm 110 140 107
Machine width cm 170 200 230
Machine height cm 950 950 950
Machine depth (from pin 3-point) cm 145 145 145
Machine weight Kg 710 / 750 760 / 800 810 / 850
Noise level in tractor driver area 70 dB(A)